Midcoast Trucks

SUPPLY of 1 x only used TOP-OF-THE-LINE **14 PALLET** 2013 FTE FREEZER / REFRIGERATED BODY (Internally approx 8.53m L x 2.37m W x 2.56m H  floor to roof) inc a Carrier Vector 1950 fridge unit, an under-body toolbox, 3 x body access ladders, under-body storage at rear, a 2013 Anteo 3,000kg capacity stand-up tailgate loader, 2 x passenger side access doors and 1 x drivers side access door. 

From well maintained fleet.

$200,000 new replacement cost.

Note:  Price is for the BODY AND TAILGATE LOADER - the truck is NOT INCLUDED IN THE PRICE.  unit is currently attached to the truck and will be removed upon a substantial deposit ONLY.

2013 FTE 14 PALLET REFRIGERATED INC TAILGATE LOADER

1 x only used 05 / 2013 Mercedes Benz Atego 1626 4x4 (4WD) turbo / intercooled, 6 speed manual inc air conditioning and a windscreen sun-visor.
16,000kg GVM / 20,400kg GCM
105,000 klms
Cab-chassis
Wheelbase is approx 4.64m
Fitted with a battery isolator
Stock # 13335
EXAMPLE photos only of previous similar unit from same dept.  (Actual photos will be uploaded upon lot preparation, if a deposit is not taken before hand).

2013 MERCEDES-BENZ ATEGO 1626

1 x only used 11 / 2009 Isuzu FRR 600 AMT AUTO 7.8 litre, turbo / intercooled, SiTEC235hp, 6 speed Automated Manual Transmission (AMT / AUTO / AUTOMATIC) inc an alloy bullbar, L.E.D light bar, L.E.D light bar, driver + passenger plastic weather shields and USB plug.
EX-GOVT
11,000kg GVM / 16,000kg GCM
336,000 klms
Fitted with a SERVICE BODY with OIL / LUBE FACILITIES inc;
2 x fluid storage tanks (Tank # 1 - 1.0m x 0.6m x 0.8m = approx 480 litres in total // Tank # 2 2.0m x 0.6m x 0.5m = approx 600 litres in total)
PTO driven air compressor
2 x large toolboxes (inc shelves) + 2 x smaller boxes on top
4 x integrated under-body toolboxes
Graco 2 stage vacuum pump inc hose on retractable reel
Amber beacon
2 x work lights
Large vice
Pintle hook / ball towbar
Stock # 13504

2009 ISUZU FRR600 AMT

1 x only used 2017 Yale GLP25MX - 2.5 TON LPG FORKLIFT
HOURS: 177
FUEL: LPG
NOMINAL CAPACITY: 2500KG
SERIES: GLP 25MX
CONTAINER MAST: 4590mm
INTEGRAL SIDESHIFT
CAPACITY 2280kg @ 600LC - 4590mm
TYRES: SOLID
FORKS: 1070mm
TILT FORWARD / BACK : 6/6
Techinal specification:
Drum Brakes
Powershift 1 Speed Transmission
NISSAN ENGINE
High Air Intake
Horizontal Exhaust
Swing out gas-spring assisted LPG mount lowers into a reclined and locked position
Pressure Fuel Level Sensor
Single Pedal Inch Brake
Anti Clog Plus Radiator
Radiator Screen
***ASK US ABOUT SHORT-TERM RENTAL***
Stock # 600628

2017 YALE GLP25MX

1 x only used 02 / 2016 Isuzu FXR 1000 9.8 litre, turbo / intercooled SiTEC350hp, 9 speed manual inc air conditioning.
16,500kg GVM / 36,000kg GCM
173,000 klms
Fitted with a 2015 (Fitted 04 / 2016) Palfinger PK11001 crane (2 x extensions), a steel tray (Internally approx 7.16m L x Overall 2.5m W), 2 x under-body toolboxes + 1 x dunnage cage and a hand wash tank.
Stock # 13450
Palfinger PK11001 crane specs;
2,550kg @ 4.00m
1,660kg @ 6.00m
1,240kg @ 8.00m

2016 ISUZU FXR1000

EX DEALER DEMO MODEL 2022 Liftsmart 3.5T Rough Terrain 4WD DIESEL FORKLIFT
READY FOR IMMEDIATE DELIVERY
Reliable Yanmar premium engine
In stock ready for immediate delivery
4WD with rear differential lock
3 speed transmission
DIESEL Engine under 25 hours usage
4300mm 3 Stage Full Free Lift Mast
Nominal 3.5T lift capacity
6/6 Tilt - FWD/ BACK
Integral Side Shift with 4th lever function and hydraulics to carriage
2800Kg @ 600LC 4300mm
3000Kg @ 600LC 2900mm
12 month warranty
Deep Tread Rough Terrain pneumatic tyres.
Full suspension seat fitted with operator presence system.
Simple components with large access area for service and maintenance.
Computer based diagnostics NOT required
Oscillating steer axles for the ability to keep load level over obstacles.
New dynamic load sensing hydraulic system for improved energy efficiency.
Reverse alarm and strobe for operator safety.
Wide view mast significantly increasing front field of view.
Large LCD display screen.
Specialised suspension system reduces vibration and noise.
Simple components with large access area for service and maintenance.
SN# 600516
Available for delivery Australia wide enquire now for a quote.
Ask for Chris Carlon

2022 LIFTSMART 3.5T ROUGH TERRAIN 4WD DIESEL

1 x only used 11 / 2011 Fuso Fighter FK 1024 7.5 litre, turbo / intercooled, 240hp, 6 speed manual inc air conditioning.
10,400kg GVM / 20,000kg GCM
76,000 klms
Fitted with a 2011 Altec AT37-G Elevating Work Platform (EWP / Cherry Picker) inc 4 x amber beacons, a small hand wash tank, toolboxes, a vice and a battery isolator.
Stock # 13149
PLATFORM HEIGHT = 11.4m

2011 FUSO FIGHTER 1024

**Ready for immediate delivery** (We deliver to Sydney & Brisbane)
1 x only NEW 2021 Big Joe ES18-40WA ELECTRIC - STRADDLE STACKER
PRICE : $17,900 INC GST
NOMINAL CAPACITY: 1800Kg
MODEL: ES18-40WA
TYPE: STADDLE STACKER
BATTERY VOLTAGE: 24V
SERIES: ES18-40WA
LIFT HEIGHT: 4800mm
CAPACITY:     900kg @ 600LC - 4800mm
1800Kg @ 600LC 3000mm
TYRES: Super Elastic
FORKS: 1070mm
Enquiries to Chris Carlon
STOCK # 600409
1 x only NEW 2021 Big Joe ES18-40WA ELECTRIC - STRADDLE STACKER
PRICE : $17,900 INC GST
NOMINAL CAPACITY: 1800Kg
MODEL: ES18-40WA
TYPE: STADDLE STACKER
BATTERY VOLTAGE: 24V
SERIES: ES18-40WA
LIFT HEIGHT: 4800mm
CAPACITY:     900kg @ 600LC - 4800mm
1800Kg @ 600LC 3000mm
TYRES: Super Elastic
FORKS: 1070mm
Enquiries to Chris Carlon
STOCK # 600409

2021 BIG JOE ES18-40WA

TRUCK:  1 x only NEW 2024 Isuzu FVZ 240-300 AUTO - 6x4
7.8 litre, turbo / intercooled, 300hp, 6 speed ALLISON AUTOMATIC
GVM: 24,000kg
GCM: 36,000kg
BODY:  14,000Ltr Hot Dip Galvanized Steel tank features as follows:
Low prole tank design for low centre of gravity enhancing vehicle stability. 3x 5mm crossway tank bae walls to minimize front and rear water surge.1x 5mm longitudinal bae wall full length of tank to minimize sideways water surge. Splash rim integrated all around at the top of tank. All tank surfaces are Hot Dip Galvanized for corrosion protection. The exterior of the tank is top  coated white with a two-pack topcoat paint system to match the truck cab. Tank to be mounted via a exible mounting system using spring loaded mounts either side of the body front and rear to allow for chassis ex. 3D CAD design and Trailer WIN used to ensure tank strength and axle weight distribution is perfectly balanced. Suction hose storage for 80mm suction hose assemblies. 2x 80mm suction hose assemblies to be supplied. High clearance, Heavy-duty mudguards and white rubber mud aps tted over drive group. All mudguards inc. steer to be tted with spray suppression.
TANK: Water level sight gauge tted into tank at front and rear. Front gauge to be tted on drivers side of tank. Bright coloured oat tted into sight gauges. Funnel with 80mm (3'') hydrant top-ll system including regulation air gap and non return check valve. Hydrant ll to comply with water authority regulations. System can be used with hydrant stand pipes, overhead gantry ll or self lling with water pump.
PUMP SYSTEM: Hot shift PTO to suit automatic transmission Allison 3000 (steel tank). System includes hydraulic pump, ow control valve, pressure relief valve and check valve. HYDAC hydraulic oil tank with integrated hydraulic oil cooler. Tank tted with return cartridge lter, oil level gauge, temperature gauge & 20 litres of 68 grade hydraulic oil. Pump engaging switch tted into the in cab control panel in easy reach of seated operator. Pump engaging switch tted externally LHS of body near suction system in easy reach of operator standing on ground.(to assist operator with suction lling and hose reel operation etc.)Hydraulic system to be mounted in a protected and accessible position. Hydraulic system meets the AS2671-2002 and is tested, rated and suitable for water pump. Hydraulic system in operation is below the permissible noise level of 85dB. Australian made Southern Cross 100x65x250 heavy duty cast iron water pump, approximately 2,200 LPM at pump, total 60 MTR head and 86 PSI. Water pump to beclose-coupled to hydraulic drive Permco motor (Made in USA). Flexible bellows tted between tank and pump to permit ease of removal of the pump if required and to isolate pump vibration. Enables the driver to adjust the hydraulic driven water pump speed at will from the cabin. System capable of controlling hydraulic motor speed over the entire engine speed range and is also capable of being overridden by the accelerator pedal. Water pump pressure relief valve tted (steel tank) to allow continuous safe operation of the water pump even when all sprays are off thus preventing damage to water pump seal due to heat build up and pump cavitation.
SUCTION PIPEWORK: 80mm (3'') Pump suction system (steel tank) positioned on a 45 degree downward facing position for easy suction hose connection. The tank return line is to be plumbed directly into the tank wall. System capable of lling tank from water supplies such as rivers and holding dams and the tank can also be drained from this point. Coupling is 80mm male cam lock.
PRESSURE PIPEWORK: 80mm (3'') pipe work to be hot dip galvanised to match the incredible lifespan of the galvanised tank. 1x 80mm (3'') under body pressure fed v-jet spray bar tted with 14 brass v-jets and removable ends for ushing. Spray bar mounted on chains for exibility on rough terrain.1x 80mm (3'') under body pressure fed v-jet spray bar tted with 14 brass v-jets and for ushing. Spray bar mounted on chains for exibility on rough terrain.
SPRAYS: 1x 80mm (3'') Rear centre deector fan spray. Fan spray, on roll groove and camlock ttings for full adjustment of spray. Fan spray to have adjustable clamp for controlling water volume, e.g. ne or heavy spray patterns. 2x 80mm (3'') rear batter deector fan sprays. Sprays on roll groove and camlock ttings for full adjustment. Fan sprays to have adjustable clamp for controlling water volume, e.g. ne or heavy spray patterns. 2x 50mm forward mounted gutter usher sprays mounted as high as possible under bumper at front of truck for washing down roads etc. (steel tank)
CANNON: 65mm electric Nitro water cannon including air actuated on/off valve. 8 way joy stick controller mounted in easy reach of operator for simple UP/DOWN/LEFT/RIGHT and electric nozzle for FOG/JET STREAM spray patterns.
OUTLETS;: 1x 80mm (3'') Pressure outlet with wafer buttery valve and cam-lock. System capable of emptying tank and pumping out to external equipment.1x 20mm (3/4'') Pressure outlet with ball valve with tap connection. (For concrete saw, pressure washers etc)
CONTROLS;: All sprays to be air over air actuated. Air lines connected to illuminated switches and mounted in a control box for in cab operation. Control box to be mounted in easy reach of operator.
HOSE REEL; Heavy duty high volume manual rewind hose reel tted with 20m of 25mm industrial wash down  hose and adjustable re ghting nozzle. Manual ball valve tted in supply line..
ELECTRICAL; Heavy duty electrical harness system using Deutsch connectors and premium automotive wire for added protection in corrosive environments. IP66 rated Power distribution module tted with fuses & relays to run water truck system whilst safeguarding OEM vehicle and electrical components. Heavy duty Hella self-adjusting reverse alarm wired to only operate when reverse gear engaged.
LIGHTING; Sub frame tted with LED combination tail lights including reverse. Lights mounted into steel channel for protection.6x LED side clearance lights and 2x indicator lights mounted into side rail. 1 x number plate light. All wiring to be in conduit and lighting to comply with the ADR for 24hr operation. 1 x Hella LED amber beacon light tted to top rear of tank for ultimate visibility. 1x Hella LED rear work light tted to top rear of tank for lighting up the rear platform.
TOOLBOX: Heavy duty black powder coated steel tool box. Tool box tted with fold out door and lockable tee handles. Approx. tool box dimensions: L800mm x W500mm x D500mm. 2 x Sets of keys supplied (all compartments keyed alike).
RUSTPROOFING: Metal sub frame and pipework to be hot dipped galvanized. Nylon spacer strips to run full length between tank sub frame and truck chassis rails to prevent corrosion. All ttings to be made from non-corrosive materials such as brass and aluminium.
STYOCK # B90110
Note:  Price is NOT including on road costs.  Example photos only of a previous unit we did (actual photos coming soon, if a deposit is not taken before hand.  Actual unit may differ slightly from unit shown in photos)

2024 ISUZU FVZ 240-300 AUTO

1 x only used 02 / 2014 Isuzu FVZ 1400 Auto (6x4) 7.8 litre, turbo / intercooled, SiTEC295hp, 6 speed ALLISON AUTOMATIC inc air conditioning.
24,000kg GVM / 36,000kg GCM.
318,000 klms.
Fitted with a 2014 West-Trans MXS 150 SKIP BIN LIFTER inc in-cab controls.
Stock # 13514
Example photos only of a previous truck from the same fleet we had. Actual photos will be uploaded upon lot preparation, if a deposit is not taken before hand.

2014 ISUZU FVZ1400

IN STOCK AND READY TO GO
1 x only NEW 2024 Isuzu NQR 87/80-190 AMT AUTO TIPPER - 5.2 litre, turbo / intercooled, 190hp - 6 speed Automated Manual Transmission (AUTO / AUTOMATIC)
GVM: 8,700 Kg (Optional: 8,000 Kg)
GCM: 12,200 Kg
Power: 190 Hp | 140 kW @ 2,600 RPM
Torque: 513 Nm @ 1,600 to 2,600 RPM
BODY DETAILS;
Genuine Isuzu Tipper Body Internal Length: 3,800 mm
Internal Width: 2,160 mm
Internal Height: 450 mm
All Steel Body with Drop Sides
Auto Release Two-Way Tailgate
Auto Release Body Lockdown Hook
Shovel Rack
LHS and RHS Rope Rails
Non-Slip Side Steps
20 Sec. Raise / 20 Sec. Lower Time
3.6 m³ Cubic Volume
4.5 mm Thick Deck Plate // 3.2 mm Thick Side / Front / Tail Plate
Note:  Price is NOT including on road costs.

2024 ISUZU NQR 87/80-190 AMT

VEHICLE;
1 x only NEW 2024 Isuzu FXY 240-350 AUTO MLWB (6x4) 9.8 litre, turbo / intercooled, 350hp 6 speed ALLISON AUTOMATIC
GVM:  24,000kg
GCM:  45,000kg
POWER:  257kw @ 2,000rpm
TORQUE:  1,422nm @ 1,400rpm
Link to VEHICLE spec sheet -->  https://www.isuzu.com.au/media/Isuzu_Files/Spec_Sheets/Current_spec_sheets/Spec_FXZ_FXY_240_350_2311R.pdf
BODY: HARBOX TIPPER
tipper body 4800mm x 2500mm overall
FIXED sides to be 1100mm high, of 5mm HT Hardox plate, with curved bottom corners
top combing rails to be 6mm folded plate, with inner strengthening rib
floor to be 6mm HT Hardox plate with angled top & shovel holder on RHS
headboard with angled top to be 50mm higher than roof
LED flashing lights fitted to alloy light bar on cab
full length mudguards both sides of body
access steps & pullout ladder on RHS of body with ladder fitted to tailgate painted yellow
tailgate to be 1200 high, two-way type.
three 20mm profile cut tailgate locking claws
tailgate to have lifting lug & angle on top edge
spreader chains on tailgate
air controls fitted to cab
air ram & booster for positive opening and closing
well type hoist with hose burst protection fitted
body prop on RHS of subframe with signage
electric tarp fitted with 450 high bows with cables and controls fitted
tie rails, 200mm above floor level, 300mm long, and approx four along body each side
rear tail lights, side and rear clearance lights to be LED type
supply & fit 500mm black toolbox with lanyards
body to be sandblasted, etch primed, sealed & painted with 2-pac type paints
white in colour
Including;
Genuine Isuzu Reverse Camera
Rubber Floor Mats
Canvas seat covers
Stock # B81968
Note:  Price is NOT including On Road Costs.  Example photos only (of a different unit / body), actual photos will be uploaded upon completion (if a deposit is NOT taken before hand).

2024 ISUZU FXY 240-350 AUTO MWB

Find Trucks For Sale. Browse 120 listings from Midcoast Trucks.

New & Used Trucks For Sale

Midcoast Trucks

Sale Price

2013 FTE 14 PALLET REFRIGERATED INC TAILGATE LOADER

2013 MERCEDES-BENZ ATEGO 1626

2009 ISUZU FRR600 AMT

2017 YALE GLP25MX

2016 ISUZU FXR1000

2022 LIFTSMART 3.5T ROUGH TERRAIN 4WD DIESEL

2011 FUSO FIGHTER 1024

2021 BIG JOE ES18-40WA

2024 ISUZU FVZ 240-300 AUTO

2014 ISUZU FVZ1400

2024 ISUZU NQR 87/80-190 AMT

2024 ISUZU FXY 240-350 AUTO MWB

Midcoast Trucks

Dealer Address